[Apple - Purple Mode]

New operations for supported Apple A12 / A13 devices,

powered by the usbliter8 RP2350 Hardware Pwner:

✔ Boot Diag – Boot the device into Apple Factory Diagnostics Mode BETA

✔ Erase – Read Serial / Wi-Fi MAC / Bluetooth MAC / Ethernet MAC, then trigger a Factory-Level Wipe on next boot BETA

Apple Supported Models:

• iPhone XS

• iPhone XS Max

• iPhone XR

• iPhone 11

• iPhone 11 Pro

• iPhone 11 Pro Max

• iPhone SE (2nd generation)

• iPad Air (3rd generation)

• iPad mini (5th generation)

• iPad (8th generation)

• iPad (9th generation)

⚠ Requirements

• Both operations require an RP2350-based Hardware Pwner flashed with usbliter8 firmware.

• The target device must first be placed into Pwned DFU Mode using the usbliter8 Hardware Pwner before running Boot Diag or Erase.

🔌 Supported RP2350 Boards

• Waveshare RP2350 USB-A

• Waveshare RP2350 Zero

• Pimoroni TINY2350

• Raspberry Pi Pico 2

Note: Any compatible RP2350-based board flashed with usbliter8 firmware may also be used.

💡 Usage Flow

1. Connect the RP2350 Hardware Pwner to the PC.

2. Put the iPhone / iPad into DFU Mode, then connect it to the RP2350 USB-A port.

3. Disconnect and reconnect the RP2350 board to the PC to start the pwn process.

4. Wait until the device is successfully placed into Pwned DFU Mode.

5. Select Boot Diag → the device boots into Apple Factory Diagnostics Mode.

6. Select Erase → a Factory-Level Wipe is triggered on the next boot.